Giá bán: 63.000 đ
Module nguồn chuyển đổi điện áp xoay chiều sang 1 chiều AC-DC input 220V output 5V/3W dùng trong các ứng dụng smartcontrol, smarthome với ưu thế nhỏ gọn và chống nhiễu tốt.
1. Product features:
1. Meet UL, CE requirements,
2. Ultra-thin, ultra-small
2. All voltage input (AC: 90 ~ 264V)
3. Low ripple and low noise
4. Output overload and short circuit protection
5. High efficiency, high power density
6. The product is designed to meet the requirements of EMC and Safety Test
7. Low power consumption, environmental protection, no-load loss <0.1W
8.100% load aging and testing
9.1 year warranty perio
2. Environment Condition
| Item Name | Technical Criteria | Unit |
| Operation Temperature | -20—+60 | Centigrade |
| Store Temperature | -40—+80 | Centigrade |
| Relative humidity | 5—95 | % |
| Cooling way | Cooling by radiation |
|
| Atmospheric pressure | 80—106 | Kpa |
| Sea level elevation | ≤2000 | m |
| Vibration | Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes |
|
3.Electrical Characteristic
1. Input characteristics (test at room temperature 20 Centigrade ).
| Item Name | Technical Criteria | Unit |
| Rated input voltage | 100-240 | VAc |
| Input voltage range | 90-264 | VAc |
| Maximum input current | ≤0.2 | A |
| Input current surge | ≤10 | A |
| maximum input voltage | ≤270 | VAc |
| Enter slow start | ≤50 | mS |
| Input Low Voltage Efficiency | Vin=110VAc,Output full-load≥69 | % |
| Input High Voltage Efficiency | Vin=220VAc,output full-load≥70 | % |
| Long-term reliability | MTBF≥100,000 | h |
| Load rated output voltage | +5±0.1 | VDC |
| Full rated output voltage | +5±0.2 | VDC |
| Short-term maximum output current | ≥1000 | mA |
| The maximum output current for a long time | ≥600 | mA |
| Voltage Regulation | ±0.2 | % |
| Load Regulation | ±0.5 | % |
| Output ripple and noise (mVp-p) | ≤50 Rated input voltage, full load. Using 20MHz of bandwidth, The load side 10uF and 0.1uF capacitor to be tested. | mV |
| Switch overshoot amplitude | (Rated input voltage and output load plus 10%)≤5 | %VO |
| Output over-current protection | 150-200% of the output maximum load | A |
| Output short circuit protection | Direct short circuit at the normal output, automatically resume normal operation after a short circuit removal |
|
4.Safety Characteristics:
4.1 Products designed to meet UL, CE safety certification requirements.
4.2 Safety and electromagnetic compatibility
Designed with the input of 0.5A UL certified insurance;
PCB board using double-sided copper clad plate production, material for the 94-V0 fire rating level;
Ý kiến bạn đọc
Cách đọc số định danh Unique ID của chip STM32
Hướng dẫn sử dụng bộ chuyển đổi CAN-USB V7.1 trên Windows
Cách đẩy tọa độ lấy từ module GPS lên Gmap
Hướng dẫn sử dụng module GY-MCU90615 v2 Uart
(Demo) Laser Distance Sensor
Hướng dẫn sử dụng module ESP32 camera
Hướng dẫn sử dụng cảm biến siêu âm JSN-SR04T-2.0
Project Driver ILI9341 cho STM32F103VET6
Hướng dẫn sử dụng màn hình OLED SSD1306 I2C với arduino
Hướng dấn sử dụng module KQ-130F với arduino
Giao tiếp màn hình OLED 1.3 inch SH1106 với STM32
Thư viện màn hình OLED cho STM32, chip SSD1963 giao tiếp SPI
Thư viện USB-CDC cho STM32F4 Discovery, cổng COM ảo VCP
[ Tự học STM32 ] Ngoại vi GPIO, nháy LED đơn
Nguyên lý cấu tạo cảm biến siêu âm thông dụng
[Tự học STM8S] Bài 01: GPIO nháy LED đơn
[Tự học STM8] Bài mở đầu